Futaba 4YF 4-Channel FM 40MHz/ R136F/ 3xS3003  [4YF_c1]

This is actually the Futaba 4YF 4-Channel radio System with 3x S3003 Servos.

CHARACTERISTICS:

All-channel servo reversing to obtain more installation options
Transmitter and receiver NiCds created from genuine Sanyo cells can be
recharged at the same time as a result of included 50mA instantly charger
Power and servo reversing switches could be positioned down and from the
way for convenience and to avoid accidental changes
The battery pack meter features one green and another red LED for easy-to-read
go/no go status.
Dual modification R127DF narrow-band FM receiver
Ball bearing servos for smoother procedure than standard servos
Spring packed trainer toggle switch for instant "OFF"
Gimbals have really actually knurled tops for a better "feel" regarding sticks and to
prevent small little hand slippage.
One 12 months restricted guarantee

INCLUDES:

One Futaba 4YF 4-channel radio system, regularity flags, servo tray, switch harness, Three
S3003 servos, and servo mounting hardware

REQUIRES: Charging batteries instantaneously

SPECS:

Transmitter:
Modulation Method: FM (regularity modulation)
energy Requirement: 9.6V NiCd battery
Curent Drain: 180mA
Trainer cable slot is a micro slot

R127DF Receiver
Narrow Band: 20kHz
Intermediate Frequency- 1st IF: 10.7MHz
2nd IF: 455kHz
Power needs: 4.8 to 6.0V (distributed to servos)
Current Drain: 10mA
Length: 2.52" (64.3mm)
Width: 1.39" (35.8mm)
Height: 0.82" (21.0mm)
fat: 1.5oz (40.5g)
Charger: FBC-8B(4)
Input: 120V AC 60Hz 4W
Output: Tx 9.6VDC 50mA
Rx 4.8VDC 50mA
Tx battery power: 600mAh
Rx battery pack: 600mAh
Bands: 72,75MHz

S3003 Servo
Speed: 0.23 sec/60 amounts at 4.8V
0.19 sec/60 quantities at 6.0V
Torque: 44.3 ounces-inches (3.2kg-cm) at 4.8V
56.8 ounces-inches (4.1kg-cm) at 6.0V
Length: 1.59" (40.4mm)
Width: 0.78" (19.8mm)
Height: 1.42" (36mm)
fat: 1.30 ounce (38 grams)
Connector: "J" kind with approx. 5" cable