Futaba 6EXAP 6-Channel FM 40MHz/ R156F [6EXAP_c3]

Price:

CAD$165.85

Brand:

Futaba

Model:

6EXAP_c3

Not Available

Please kindly input your name and email address, we will inform you once we have the restocking.

Or you may find similar product under the
R/C Models - System - Transmitter - Flight Transmitters category

Write a review

Description

QUALITIES:

Aileron, Elevator and Rudder double price switch - use this modification to flip between two aileron, elevator and rudder control throw settings. The tosses are setup nonetheless select, but generally speaking, following the switch is up the throws are greater (high rate) so when the switch is down the throws are less (reasonably priced). This switch furthermore flips between exponential expenses (if utilized).
Flap control dial/Channel 6 - This dial operates the servo related to channel 6 toward receiver in the event the model has flaps here is the control helpful to make use of them.Aileron/elevator control stick -Mounting point for optional throat strap.
Trim levers (all) -Used to get the fundamental or center host to every servo as labeled into the diagram.
Charging you jack - Port for recharging the transmitter batteries along with the included electric batteries charger.
On-off switch
INFORMATION INPUT lever - constantly change the values of assorted functions exhibited regarding the LCD screen.
Liquid-crystal display (LCD) - shows development modes and values joined.
MODE key - accustomed scroll through and show the ten or eleven(PCM) various functions.
PICK key - accustomed show the values the present function.
Throttle-cut key - to work with the throttle-cut function, lower the throttle stick entirely, then drive the throttle-cut key to fully shut the carburetor and shut of motor.
Throttle/rudder control stick - runs the servos attached with channel 3 (throttle) and channel 4 (rudder) to the receiver.
Trainer switch - operates the trainer functions. To work well with as a trainer switch the transmitter must certanly be mounted on another transmitter via. a trainer cable (available individually).
Retractable landing gear switch/Channel 5 - modification operates the servo connected with channel 5 in receiver when your model has retractable landing gear this is actually the control usually increase and retract the gear.
Antenna - Radiates signals towards receiver. Cannot ever travel a model without completely expanding the antenna or maybe you may possibly produce disruption as well as other modelers and decrease practical indicator number of the transmitter. The antenna might be eliminated and changed with another whenever it really is unintentionally broken.

INCLUDES:
Futaba 6-Channel 6EXAP transmitter
Futaba R156F Receiver
modification Harness
Handbook

SPECS:
Transmitter
T6EXAP Transmitter with programmable blending and 6-model memory.
Transmitting on 40 / 72 MHz musical company.
Operating-system: 2-stick, 6-channel system
Modulation: FM(PPM) and PCM
energy: 9.6V NT8S600B Ni-Cd electric batteries or 12V alkaline battery pack
current drain: 250mA

Hot Brands

Futaba 6EXAP 6-Channel FM 40MHz/ R156F [6EXAP_c3]