Futaba 6EXAP 6-Channel PCM 35Mhz/ R146IP [6EXAP_c10]

Price:

CAD$183.16

Brand:

Futaba

Model:

6EXAP_c10

Not Available

Please kindly input your name and email address, we will inform you once we have the restocking.

Or you may find similar product under the
R/C Models - System - Transmitter - Flight Transmitters category

Write a review

Description

FEATURES:

Aileron, Elevator and Rudder twin cost switch - make use of this modification to ��flip�� between two aileron, elevator and rudder control throw settings. The tosses are arranged you select, but most of times, following the switch is ��up�� the throws are greater (��high rate��) in the event that switch is ��down�� the throws are less (��low rate��). This switch also flips between exponential rates (if utilized).
Flap control dial/Channel 6 - This dial runs the servo mounted on channel 6 within the receiver just in case the model has flaps this is actually the control useful to run them.Aileron/elevator control stick -Mounting point for optional neck strap.
Trim levers (all) -Used to go probably or focus host to every servo as labeled to the diagram.
Asking jack - Port for asking the transmitter batteries utilizing the included battery power charger.
On-off switch
INFORMATION INPUT lever - constantly replace the values through the different functions exhibited regarding LCD screen.
Liquid-crystal display (LCD) - shows development modes and values joined up with up with with.
MODE key - always scroll through and show the ten or eleven(PCM) various functions.
SELECT key - accustomed show the values the present function.
Throttle-cut switch - to make use of the throttle-cut function, reduced the throttle stick completely, then drive the throttle-cut key to totally shut the carburetor and shut with this motor.
Throttle/rudder control stick - operates the servos regarding channel 3 (throttle) and channel 4 (rudder) inside receiver.
Trainer switch - runs the trainer functions. To possess results as a trainer switch the transmitter should really be linked to another transmitter via. a trainer cable (available separately).
Retractable landing gear switch/Channel 5 - modification runs the servo linked to channel 5 in receiver when your model has retractable landing gear this is actually the control constantly expand and retract kit.
Antenna - Radiates signals towards the receiver. Never travel a model without entirely expanding the antenna or you may create interruption to varied other modelers and decrease practical indicator choice of the transmitter. The antenna could be expunged and changed with another in the case it is inadvertently broken.

Hot Brands

Futaba 6EXAP 6-Channel PCM 35Mhz/ R146IP [6EXAP_c10]