Futaba 6EXAP 6-Channel PCM 40MHz/ R146IP [6EXAP_c4]

Price:

CAD$183.16

Brand:

Futaba

Model:

6EXAP_c4

Not Available

Please kindly input your name and email address, we will inform you once we have the restocking.

Or you may find similar product under the
R/C Models - System - Transmitter - Flight Transmitters category

Write a review

Description

QUALITIES:

Aileron, Elevator and Rudder twin price switch - maximize this modification to flip between two aileron, elevator and rudder control throw settings. The tosses could possibly be create however determine, but in most cases, in case switch is up the throws are greater (advanced) whenever switch is down the throws are less (reasonably priced). This switch moreover flips between exponential rates (if utilized).
Flap control dial/Channel 6 - This dial operates the servo installed on channel 6 inside the receiver if the model has flaps here is the control useful to work them.Aileron/elevator control stick -Mounting point for optional throat band.
Trim levers (all) -Used to move the fundamental or center position of the servo as labeled into the diagram.
Recharging jack - Port for recharging the transmitter batteries because of the included battery pack charger.
On-off switch
DATA INPUT lever - usually exchange the values regarding the different functions exhibited regarding the LCD display screen.
Liquid-crystal screen (LCD) - shows development modes and values joined up with.
MODE key - frequently scroll through and show the ten or eleven(PCM) different functions.
PICK key - constantly expose the values the prevailing function.
Throttle-cut switch - to make use of the throttle-cut function, paid down the throttle stick totally, then drive the throttle-cut key to completely shut the carburetor and shut through the motor.
Throttle/rudder control stick - runs the servos attached with channel 3 (throttle) and channel 4 (rudder) inside receiver.
Trainer switch - runs the trainer functions. To work well with as a trainer switch the transmitter must link with another transmitter via. a trainer cable (available individually).
Retractable landing gear switch/Channel 5 - modification runs the servo attached with channel 5 in receiver as soon as your model has retractable landing gear here is the control frequently stretch and retract the apparatus.
Antenna - Radiates signals on receiver. Don't ever travel a model without completely expanding the antenna or perhaps just you could produce disruption to varied other modelers and decrease practical indicator collection of the transmitter. The antenna might removed and changed with another whenever it is unintentionally broken.

INCLUDES:
Futaba 6-Channel 6EXAP transmitter
Futaba R146IP Receiver
Change Harness
handbook

SPECS:
Transmitter
T6EXAP Transmitter with programmable blending and 6-model memory.
Transmitting on 40 / 72 MHz musical organization.
Os: 2-stick, 6-channel system
Modulation: FM(PPM) and PCM
energy: 9.6V NT8S600B Ni-Cd battery pack or 12V alkaline battery pack
current drain: 250mA

Hot Brands

Futaba 6EXAP 6-Channel PCM 40MHz/ R146IP [6EXAP_c4]