KO Propo 40051 - VFS-1 BMC Brushless Motor Controller 1.5  [KO-40051]

VFS-1 BMC v1.5 #40051
variation 1.5 related to BMC shows it self on ROAR Carpet Nationals with 3 TQ jobs and two victories inside's very first outting. Five new preset programs now you can adjust the drag stopping system through setup switch in 10per cent increments (OFF-50per cent). All requirements will be the identical once the first 1.0 variation, but you'll be capable apply through inventory motor manager for increased rates.

All v1.5 now wthhold the added ROAR Spec function to comply with the NO timing system. The switch LED will flash at basic to point that 0 timing wound up being set towards ESC.

Specs:

The VFS-1 BMC employs KO PROPO's patented VFS technology.
Five preprogrammed settings
Overheat & current Overload safety ready
engine limitation: 4.5T (with heat sink and fan installed, 2.5T)
Size: 33.4 x 37.0 x 16.8 (mm) bodyweight: 30.8g
Max Peak Active: 3120A (FET Specs)
Max Continuous Active: 780A (FET Needs)

VFS technology enables you to undoubtedly plan and fine tune:
Drive frequencies (2KHz~12.0KHz) for 32 throttle actions to obtain additional control/efficiency
stopping system regularity (500Hz~2.5kHz) 64 settings
Drag Brake (off~255 action modification)
Three electric batteries settings [NiMh (4C), NiMh (5,6C), LiPo(2S)]
For setting help select below.