Kyosho 32530MB - Radio Controlled Electric Powered Crawling car MINI-Z 4x4 Series Ready Set Suzuki Jimny Brisk Blue Metallic  [KY-32530MB]

In 2019 the whole planet's top mini RC show, called Kyosho MINI-Z, celebrated above 2 decades of unmatched performance and scale realism in hobby-grade RC category. The constant seek out performance and development has triggered the creation of a completely-new ‘MINI-Z 4x4’ design promoting an all-new driving experience for RC fans out of all the stripes, with superior general design, driving performance and top-notch injection-molded scale human body construction. A large function of MINI-Z 4x4 show could be the greater focus of human anatomy information and quality of finish that also surpasses present benchmarks set by the MINI-Z. Your body ordinarily molded with thicker item to raised resist crash harm from procedure in rough area. Integrating comparable ladder- design framework of genuine 4WD automobiles, the MINI-Z 4x4 boasts a 3-link rigid axle suspension system system combining just what would typically be two top links into one top A-arm to provide you with maximum suspension system system system system movement. A specially produced high-torque steering servo enables this revolutionary product to position its elbows around in difficult landscapes for exceptional performance in to the many challenging rock-crawler conditions. The high-torque 130-size motor leads to the beast in MINI-Z 4x4, especially tailored for run well inside low to moderate rate is different typical in crawling.

Created to balance exquisite design, scale information and superior driving performance, most of the MINI-Z 4x4 requirements is 8 x AAA alkaline batteries (provided separately). Enjoy driving under any conditions, from normal driving to rock crawling while appreciating the beautiful imaginative appearance. The Kyosho Mini-Z 4x4 could be the only mini crawler giving you the whole choice of crawling performance in a substandard package.

TECHNICAL INFORMATION

• Length 193mm
• Width 84mm
• Height 90.0mm
• Chassis Type MX-01
• Wheel Base 120mm
• Tread F/R:72.7mm
• Weight 242g (excl. battery)
• Motor/Engine 130 Class
• Gear Ratio 55.44:1/46.20:1/39.60:1
• 39.60:1/34.65:1/34.65:1
• Front Tire Diameter Φ37.0mm
• Rear Tire Diameter Φ37.0mm
• Front Tire Width 12mm
• Rear Tire Width 12mm
• Battery 4 x AAA Alkaline
• Transmitter Syncro KT-531P
• Speed:Approx. 2.7km/h5.4km/h (Pinion gears 10T 20T)
• Running Time Approx. 60 mins

KIT CONTENT

• Complete framework with important gadgets.
• Factory-painted body step by step with numerous fine details
• KT-531P 2.4GHz transmitter
• Pinion gear set(10T12T14T16T18T20T)
• 3 forms of pinion gear spacers

REQUIREMENT TO UTILIZE

• 4 x AAA batteries the transmitter
• 4 x AAA batteries for framework (Alkaline or NiMH)