Kyosho 32890 - MINI-Z Racer MR-04EVO2 Chassis Set (W-MM/8500KV)  [KY-32890]

While maintaining areas of the superb MR-03 design, the prevailing MR-04EVO2 chassis achieves significant performance improvements with improvements towards front suspension system system and a minimal C of G that help synergy with a sensored brushless engine. Both slim and wide tread settings is available by changing the reduced and top dishes about the front component utilising the steering tie pole. Adjustable wheelbase enables framework developing centered on genuine stature.

- While camber angle is optimized during cornering utilizing the move today's top supply design, leading suspension system system system employs today's kingpin-integrated knuckle to boost camber stability. Geometric modification of caster and program etc. provides more linear maneuverability. Amazing spec front part springs the MR-04 with various hardness may be had as choices.

- Front knuckle design features included kingpin with optimized approval using the kingpin ball for smoother procedure. Ball bearings happen changed to 3mm inside diameter for paid off rotational opposition.

- All 7 ball bearings are 3mm interior diameter for paid down rotational opposition to attenuate friction loss.

- repaid mounting for the AAA batteries on framework understands a lower center of gravity set alongside the MR-03. With the framework kind, this improves protection through corners and boosting speed and control.

- Ball differential included as standard optimizes the rotational distinctions whenever considering staying and straight back tires whenever switching. Also provides moderate slide action to boost traction whenever extortionate load is used. Silver clear anodized complete to aluminum components creates a formidable design to complement performance.

- This fresh device besides aids high-speed discussion with different high-end transmitters and receivers to grasp unprecedented control response. Achieves transmission rates of 0.99ms with KO products (ADV mode) and 0.9ms with Futaba products and services (EVO2 mode). *Previously 2.6ms ~ 3.0ms

TECHNICAL INFORMATION

• Length 124.5mm
• Width 72-76mm
• Height 31mm
• Motor Mount MM
• Wheelbase 98.0mm (LL)
• Tread(F/R)63.5-65.0mm/61.5-65.0mm
• Gear Ratio 7.3/6.3/5.5/4.9:1
• Weight 135.5g (Body / tires / tires not included.)
• Motor KYOSHO SPEED ABODE XSPEED 85 (KV8500)

KIT CONTENT

• MR-04 EVO2-W-MM Factory assembled framework with KYOSHO SPEED ABODE KV8500 brushless motor
• Parts set for changing front part tread
• 6T/7T/8T/9T Pinion gears
• Wheel wrench
• Tools for pinion gears
• Spare wheel peanuts

REQUIREMENT TO DO

• Transmitter
• Receiver item (perfect for EVO/EVO2)
• ASC
• AAA x 4 batteries for chassis
• Batteries for transmitter