Kyosho 34362 - 1/10 Scale Radio Controlled Electric Powered 2WD Truck 2RSA SERIES Outlaw Rampage PRO  [KY-34362]

Embodying the defining mechanics of an actual manufacturing model trophy automobile, the scale 2WD Outlaw Rampage is mainly about 80percent pre-assembled in an ARR kit, such as the optional upgrade elements that mark that as a “PRO” variation. While energy and steering control is harder than a 4WD model, the superior running security and basic functionality of the backside wheel 2WD is recognized from roll cage, long move aluminum oil shocks, stabilizers on front side and straight back with 3 different cable measure settings, and aluminum skid pads that protect the framework. With effortless controllability and wider range for environment alterations, the powerful performance of 2WD car battle is in arms.

●ARR Kit 's very nearly totally pre-assembled and includes performance-enhancing optional elements as standard.
●Full ball bearing needs (20 bearings) confirm smooth movement with minimal drive loss.
●3-piece front part bumper protects the framework from difficult crash harm.
●Front double-wishbone suspension system system system system with longer sus arms understands excellent driving safety and traction.
●Rear suspension system system could be because of this rigid axle differential to produce smooth movement and superior traction control.
●Gearbox features 32-pitch module countertop gear and diff gear. Reinforcement of both gears and big modules understands increased energy (spur gear is 48-pitch).
●Lever lock owner enables effortless eradication of electric batteries.
●Connector owner allows connector towards radio dish be eradicated with one hand.
●Hex screws are utilized throughout for effortless upkeep.
●Pre-cut clear scale body recreates 1970-80’s trophy vehicle design.
●Choose either square or circular headlights combined with the two front grill designs included.
●Compatible with Light-emitting Diode light product (No. 97054-2: two lights, 97054-4: four lights) for effortless installation.

Real roll cage with two free tires not simply provides scale appearance and also provides structural and developing functionality. Changing from horizontally create tires to one or higher vertically mounted and changing the space can modify the surplus fat security for modification of straight back traction traits.

Mounting a few tires also changing the longitudinal size a lot influences right back hold. These elements perform a practical component in boosting driving security.

TECHNICAL DATA

• Length 561mm
• Width 262mm(with human anatomy)
• Height 231mm(with human anatomy)
• Wheelbase 335mm
• Tread (F/R) 204mm/204mm
• Tires (F/R interchangeable) φ108×38mm
• Gear Ratio 12.65:1
• Weight 2600g (approx.)

KIT CONTENT

• Approximately 80percent pre-assembled ARR kit
• Pre-cut clear body
• Decals
• Hex wrench
• Cross wrench
• Shock oil

REQUIREMENT TO RUN

• 2ch 1 servo R/C system for cars
• 540 system motor
• ESC suitable for motor
• Battery for chassis
• Battery charger
• Paint for (polycarbonate) body
• Batteries for transmitter
• Tools