Serpent SER600039-B Serpent Cobra E-Truggy RTR Blue [SER600039-B]

Price:

CAD$524.25

Brand:

Serpent

Model:

SER600039-B

Not Available

Please kindly input your name and email address, we will inform you once we have the restocking.

Or you may find similar product under the
R/C Models - Off-Road - Truggy - Electric Powered category

Write a review

Description

Introduction

The Serpent Cobra E-Truggy in RTR trim is a great basher type vehicle that'll you'll want to just take numerous beating plus its also a great package originally genuine competition ! On the basis of the Cobra E-Truggy it's the outright cost, great management, reliability, rigidness and durability you will need.

The RTR package is really dialed:
- factory develop rushing framework
- prepainted and precut low kind truggy human anatomy and big composite back wing
- premounted truggy tyres/wheels/inserts
- pre-set 4S waterproof 150A speedo ( DragonRC)
- 2000kv brushless longbody motor (DragonRC)
- electronic 2.4ghz transmitter (DragonRC)
- steel gear servo 16kg ( DragonRC-Savox)
- 3 oilfilled geardifferentials
- Big bore shocks with artificial dustboots and machined aluminium shocktowers
- springtime steel transmission elements and turnbuckles, front part and rear cvd driveshafts
- Front and back anti-roll bars
- big battery-cases with effortless felcron straps
- Machined aluminium chassisplate
- totally ballraced
- Batteries the automobile and transmitter aren't included

The bodyshell is supposed to be orange, red, green, blue and red, and a specific kind.

Serpent provides many optional elements because of this vehicle to boost performance, lighter or even for in addition nicer appears.
Available in 4 colors:
600039-O Serpent Cobra E-Truggy RTR orange
600039-R Serpent Cobra E-Truggy RTR red
600039-B Serpent Cobra E-Truggy RTR blue
600039-G Serpent Cobra E-Truggy RTR green
Main features

vehicle
entirely expert pre produce and pre-set framework and products.

Transmitter
DragonRc 2.4 GHz steeringwheel kind transmitter with lots settings and good range. Comes with small and light receiver.

Speedo
DragonRC waterproof speedcontroller with an enormous 150A ability to manage the brushless motor and 4S electric batteries

engine
DragonRC longbody 2000kV brushless engine with effortless colorcoded connectors

Body
Prepainted and pre-cut low e-Truggy body, in 4 primary colors orange, red, Green and Blue. ( furthermore clear one available as optional)

Tyres
Premounted battle prepared tyres / tires with soft substances and pintype profile for amazing hold.

Chassis
acutely slim 3mm 7075T6 aluminium framework, with machining inside top face rendering it lighter in strategic places also to get a grip on flex. Kick-up front component for appropriate landings. Angled component to boost cornering approval, and safeguarded and simple mounting component guards with 5 screws. Countersunk holes, pouches to put the suspension system system brackets. Generally the Truggy should keep carefully the fat really main and nearby the centerline that you can, to make a fantastic basic balance.

Part guards / electric batteries trays
Durable shaped composite side guards / battery trays that stick to the sort of the framework, and mount with 5 screws each part. Front and edges sufficient to keep the dust along. The guards/trays create many security. The batteries are put up in longtudinal fashion, keeping the excess weight suprisingly low in vehicle. The electric batteries trays features user-friendly Serpent marked felcron TM straps to secure the batteries constantly in place. Fits 2S and 3S batteries.

Motormount:
The motor is invest many optimal location inside vehicle, keeping motor-forces and transmission elements / positioning at heart. Just one-screw is needed to secure the BL engine, on nicely produced durable machined aluminium motormount. Region for extra motor-cooling available as needed. The location the motor enables mounting all popular buggy and (monster)truggy machines.

Composite framework braces
Allows the framework to flex which assists improve bump management. Front and right back.

Front bumper
well curved front bumper, exactly like about the Cobra buggy, to shield the most truly effective anti-roll club, suspension system system brackets, and moves inline with kick-up framework front side component for safe landings.

Front suspension system system system system
lengthy and durable composite reduced wishbones, and top spring-steel trackrods. 2 paid off shock-mount jobs. Downstops may be used as needed. Pivotball type anti-roll club rods.
.
Front steering / servo saver / angled
Revolutionary angled front side steering installation to lessen the angle of distinction betwixt your total caster and steering airplane. Consequently you 'must' have less bump steer and a truer steering Ackerman through the entire selection of suspension system.

Adjustable springtime stuffed servo-saver system with interchangeable Ackermann meals. Coupled with design regarding steering bell cranks whenever changing the Ackerman you will not should adjust your steering tie rods. You merely only will have to adjust your end points by yourself radio.. no problem finding yourself in and set-up.

The Inboard Bell crank keeps the lever and linkage inside car. It can help combined with avoidance of dilemmas the steering system. Zero scrub radiuses on steering knuckle, assists in reducing the jacking impact manufactured by your steering knuckle offset. It provides an infinitely more direct dropped while keeping the vehicles framework more level while switching.

the best roll center are changed quickly by going the steering knuckle shims using appropriate places.

Topped of with a significant composite top-plate.

Front steering-block / c-hubs
extremely durable front side component steeringblock / C-hub installation .

Drive-shafts
considerably longer and lightweight springtime steel services and products with pressed in metal pins, laser-engraved. Identical size front component and back.

Wheel-axles / wheel-nut
Serpent springtime metal threaded wheel-axles with lightweight grey anodised aluminium wheel-nuts to help keep the massive truggy wheels/tyres on system.

Captured universal bones
Guarantees you'll be able to finish a race without loosing a pin or set screw. All elements, axles and drive train elements have capture pins

Front shocktower
Light, strong and durable machined 5mm aluminium services with 5 jobs for shockangle.

Shock-set front component and back
16mm big bore shocks, with difficult anodized precision threaded shock-bodies. Shockboots in silicone synthetic to put on the dirt away . Chromed shock-shafts for supersmooth shockaction . The larger o bands offer less fundamental anxiety and a better seal without dragging inside shock shaft.

Suspension brackets
The hinge-pins / hingepin balls are captured in durable composite suspension system system system system brackets . These capture the nylon roll-center inserts.

Anti-roll club / anti-roll club linkage with pivotball
The anti-roll pubs front and back are constructed of good unique springtime steel, and they are captured inside diff-cased in ballbearing for perfect guidance and control.

Receiver package / servo mount / speedo mount
Composite one piece radiobox to firmly install servoï¿½ s, speedo and receiver. For maximum security the light receiver fits the top-case effortless, with a few opening to permit cable to protrude. The speedo seats suprisingly low on a plate right above the framework, because of this quick cables enables you to the engine. The servo is established in a vertical fashion.

Central diff
Optimised main gear-diff with 50T super-hard spur-gear . Smaller, compact design to reduce rotating mass towards the absolute most.

Transmission shafts
Durable but light and slim Serpent springtime metal, laser etched shafts.

Front and right back diff
Optimised gear-diff with superhard spur-gears . Smaller, compact design to reduce rotating mass towards maximum. Exact same variation front component and straight back. Diff coupler in springtime steel seated in big barings for durability.

right back shocktower
Light, strong and durable machined 5mm aluminum product with 5 functions for shockangle.

Right back uprights
Durable composite back uprights with 3 camber functions

Suspension brackets right back
Durable composite products with eccentric inserts to improve set-up.

straight back wing mount
The composite straight back wing mount, allows to enhance the angle attached to straight back wing.

Back wing
Two duration high down force wing, has two forms of angle, which also includes 2 fins. Helps improve down force and right line ability

Bodymounts
Nylon bodymounts with wider sitting one's body, securely fastened on shocktowers.

Super minimal profile e-Truck Body
improves look additionally keeps the profile minimum. Comes precut and prepainted.

Decals
included with your body.

Oils / oil
car is develop with a high quality silicone oils the diffs and shocks and black colored colored oil. Threadlock utilized in which required.

Handbook
color manual showing the car, specs, tips and exploded views. The transmitter and speedo have really little split manuals included.

Box
color protective package to re-use for vehicle transport or tyres.

Hot Brands

Serpent SER600039-B Serpent Cobra E-Truggy RTR Blue [SER600039-B]