Serpent SER600039-G Serpent Cobra E-Truggy RTR Green  [SER600039-G]

Serpent SER600039-G Serpent Cobra E-Truggy RTR Green
Price:
CAD$505.87
Brand:
Serpent
Model:
SER600039-G
Condition:
Brand New
Write a review
  • Introduction

    The Serpent Cobra E-Truggy in RTR trim is an amazing basher type car that'll you will need to take numerous beating and its own in addition outstanding package in the first place genuine battle ! On the basis of the Cobra E-Truggy it is the outright rate, great managing, reliability, rigidness and durability you need.

    The RTR package is dialed:
    -factory assembled rushing chassis
    -prepainted and precut low kind truggy human body and big composite back wing
    -premounted truggy tyres/wheels/inserts
    -pre-set 4S to 6S capable waterproof 150A speedo ( DragonRC)
    -2000kv brushless longbody motor (DragonRC)
    -Digital 2.4ghz transmitter (DragonRC)
    -Metal gear servo 16kg ( DragonRC-Savox)
    -3 oilfilled geardifferentials
    -Big bore shocks with synthetic dustboots and machined aluminium shocktowers
    -Spring steel transmission elements and turnbuckles, front component and back cvd driveshafts
    -Front and straight back anti-roll bars
    -Large battery-cases with effortless felcron straps
    -Machined aluminium chassisplate
    -Fully ballraced
    -Batteries the auto and transmitter are not included

    The bodyshell comes into play orange, red, green, blue and red, plus a specific sort.

    Serpent provides numerous optional elements because of this car to boost performance, lighter and on occasion even also for nicer look.

  • Main features

    Car
    Fully expert pre built and pre-set framework and electronic devices.

    Transmitter
    DragonRc 2.4 GHz steeringwheel type transmitter with lots settings and good range. Includes tiny and light receiver.

    Speedo
    DragonRC waterproof speedcontroller with a huge 150A power to manage the brushless motor and 4S or 6S battery power power

    Motor
    DragonRC longbody 2000kV brushless motor with easy colorcoded connectors

    Body
    Prepainted and pre-cut low e-Truggy human anatomy, in 4 primary colors orange, red, Green and Blue. ( also clear one available as optional)

    Tyres
    Premounted battle prepared tyres / wheels with soft substances and pintype profile for amazing grip.

    Chassis
    Very slim 3mm 7075T6 aluminium framework, with machining extraordinary face which makes it lighter in strategic areas and also to control flex. Kick-up front part for appropriate landings. Angled component to boost cornering approval, and safeguarded and simple mounting component guards with 5 screws. Countersunk holes, pouches to put the suspension system system system brackets. All together the Truggy should keep consitently the excess weight extremely primary and near the centerline as you possibly can, create a great fundamental protection.

    Side guards / battery power trays
    Durable shaped composite component guards / electric batteries trays that proceed with all the distinct the framework, and mount with 5 screws each component. Front and edges sufficient to hold the dust out. The guards/trays create many security. The batteries are generate in longtudinal fashion, maintaining the extra fat little in car. The battery power trays features user-friendly Serpent noticeable felcron TM straps to secure the batteries setup. Fits 2S and 3S batteries.

    Motormount:
    The engine is devote the countless optimal destination inside vehicle, keeping motor-forces and transmission components / positioning in your mind. Just one-screw must secure the BL motor, towards nicely developed durable machined aluminium motormount. Region for extra motor-cooling available as needed. The region the engine permits mounting all popular buggy and (monster)truggy motors.

    Composite framework braces
    Allows the framework to flex which assists improve bump maneuvering. Front and rear.

    Front bumper
    Nicely curved front component bumper, just like regarding Cobra buggy, to guard leading anti-roll club, suspension system system brackets, and moves inline with kick-up framework front side for safe landings.

    front side suspension
    Very long and durable composite reduced wishbones, alongside top spring-steel trackrods. 2 paid off shock-mount jobs. Downstops can be used as required. Pivotball kind anti-roll club rods.
    .
    Front steering / servo saver / angled
    Innovative angled front side steering construction to cut back the angle of difference in the middle of your complete total caster and steering airplane. Due to this you should have less bump steer and a truer steering Ackerman through the complete number of suspension.

    Adjustable springtime stuffed servo-saver system with interchangeable Ackermann meals. Utilising the design the steering bell cranks whenever changing the Ackerman you won't have to adjust your steering tie rods. You simply only will must adjust your end points in your radio.. quite simple to achieve use of and set-up.

    The Inboard Bell crank keeps the lever and linkage within the vehicle. It's going to assistance with preventing issues the steering system. Zero scrub radiuses on steering knuckle, assists in reducing the jacking impact created by your steering knuckle offset. It gives a primary fallen while keeping the automobiles framework more degree while turning.

    The front roll center is changed quickly by going the steering knuckle shims because of their appropriate locations.

    Topped of with outstanding composite top-plate.

    Front steering-block / c-hubs
    Very durable front side part steeringblock / C-hub setup .

    Drive-shafts
    very long and lightweight springtime steel items with forced in metal pins, laser-engraved. Same size front and rear.

    Wheel-axles / wheel-nut
    Serpent springtime metal threaded wheel-axles with lightweight grey anodised aluminium wheel-nuts to keep the massive truggy wheels/tyres on program.

    Captured universal joints
    Guarantees you'll finish a race without loosing a pin or set screw. All elements, axles and drive train elements have really in fact actually capture pins

    Front shocktower
    Light, strong and durable machined 5mm aluminium devices with 5 jobs for shockangle.

    Shock-set front component and rear
    16mm big bore shocks, with difficult anodized precision threaded shock-bodies. Shockboots in silicone synthetic to hold the dirt away . Chromed shock-shafts for supersmooth shockaction . The larger o bands provide less fundamental force and a larger seal without dragging regarding the surprise shaft.

    Suspension brackets
    The hinge-pins / hingepin balls are captured in durable composite suspension system brackets . These capture the nylon roll-center inserts.

    Anti-roll club / anti-roll club linkage with pivotball
    The anti-roll pubs front and back are manufactured from high quality unique springtime steel, and they're also captured on diff-cased in ballbearing for perfect guidance and control.

    Receiver package / servo mount / speedo mount
    Composite one piece radiobox to firmly install servo� s, speedo and receiver. For maximum security the light receiver fits the top-case easy, with a small opening allowing cable to protrude. The speedo seats low on a plate right above the framework, for this reason brief cables enables you to the motor. The servo is initiated in a vertical fashion.

    Central diff
    Optimised primary gear-diff with 50T super-hard spur-gear . Smaller, compact design to reduce rotating mass toward max.

    Transmission shafts
    Durable but light and slim Serpent springtime steel, laser etched shafts.

    front part and straight back diff
    Optimised gear-diff with superhard spur-gears . Small, compact design to cut back rotating mass towards optimum. Identical variation front side component and right back. Diff coupler in spring steel seated in big barings for durability.

    Rear shocktower
    Light, strong and durable machined 5mm aluminum item with 5 functions for shockangle.

    Rear uprights
    Durable composite straight back uprights with 3 camber positions

    Suspension brackets rear
    Durable composite devices with eccentric inserts to enhance set-up.

    Rear wing mount
    The composite back wing mount, allows to boost the angle of back wing.

    Rear wing
    Two phase high down force wing, has two levels of angle, that also includes 2 fins. Helps improve down force and right line capability

    Bodymounts
    Nylon bodymounts with wider sitting your body, securely fastened towards the shocktowers.

    Super Minimal profile e-Truck Body
    Improves appearance alongside keeps the profile minimum. Comes precut and prepainted.

    Decals
    Applied towards human anatomy.

    Oils / grease
    Car is develop with a superior quality silicone oils the diffs and shocks and black colored oil. Threadlock found in which needed.

    Manual
    Full color manual showing the auto, specifications, recommendations and exploded views. The transmitter and speedo have actually really actually little split manuals included.

    Box
    Full color protective industry to re-use for automobile transportation or tyres.





Copyright © 2008-2024 rcjaz.ca All rights reserved


Flash Discount!
Flash 3% OFF by redeeming the voucher code [CC24] without mini. amount! Don’t miss out the flash offer today!