Serpent SER600039-O Serpent Cobra E-Truggy RTR Orange  [SER600039-O]

Serpent SER600039-O Serpent Cobra E-Truggy RTR Orange
Price:
CAD$506.32
Brand:
Serpent
Model:
SER600039-O
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
R/C Models - Off-Road - Truggy - Electric Powered category
Write a review
  • Introduction

    The Serpent Cobra E-Truggy in RTR trim is a perfect basher sort vehicle which could take countless beating and its particular furthermore a phenomenal package to start out genuine battle ! Based on the Cobra E-Truggy oahu will be the outright price, great control, dependability, rigidness and durability you need.

    The RTR package is obviously dialed:
    -factory assembled rushing chassis
    -prepainted and precut low sort truggy human anatomy and large composite rear wing
    -premounted truggy tyres/wheels/inserts
    -pre-set 4S to 6S capable waterproof 150A speedo ( DragonRC)
    -2000kv brushless longbody engine (DragonRC)
    -Digital 2.4ghz transmitter (DragonRC)
    -Metal gear servo 16kg ( DragonRC-Savox)
    -3 oilfilled geardifferentials
    -Big bore shocks with artificial dustboots and machined aluminium shocktowers
    -Spring steel transmission components and turnbuckles, front and back cvd driveshafts
    -Front and right back anti-roll bars
    -Large battery-cases with effortless felcron straps
    -Machined aluminium chassisplate
    -Fully ballraced
    -Batteries the car and transmitter aren't included

    The bodyshell will be orange, red, green, blue and red, including an evident type.

    Serpent provides many optional elements because of this car to enhance performance, lighter as well as for furthermore nicer appearance.

  • Main features

    Car
    Fully expert pre built and pre-set framework and electronic devices.

    Transmitter
    DragonRc 2.4 GHz steeringwheel type transmitter with lots settings and good range. Includes little and light receiver.

    Speedo
    DragonRC waterproof speedcontroller with a massive 150A power to manage the brushless motor and 4S or 6S battery power power

    Motor
    DragonRC longbody 2000kV brushless motor with effortless colorcoded connectors

    Body
    Prepainted and pre-cut low e-Truggy human anatomy, in 4 main colors orange, red, Green and Blue. ( furthermore clear one available as optional)

    Tyres
    Premounted battle prepared tyres / tires with soft substances and pintype profile for amazing grip.

    Chassis
    Very slim 3mm 7075T6 aluminium framework, with machining with regards to the top face making it lighter in strategic places and also to get a handle on flex. Kick-up front component for appropriate landings. Angled facet of improve cornering approval, and safe and easy mounting component guards with 5 screws. Countersunk holes, pouches to put the suspension system system brackets. As a whole the Truggy was created to help keep the fat really main and towards the centerline that one can, in order to make a fantastic safeness.

    Side guards / electric batteries trays
    Durable shaped composite component guards / battery pack trays that carry on with all of the amount of the framework, and mount with 5 screws each component. Front side and edges enough to hold the dirt away. The guards/trays create countless protection. The batteries are put up in longtudinal fashion, keeping the additional fat suprisingly low towards car. The battery pack trays features user-friendly Serpent noticeable felcron TM straps to secure the batteries put up. Fits 2S and 3S batteries.

    Motormount:
    The motor is invest numerous optimal location inside automobile, keeping motor-forces and transmission elements / positioning in your mind. Simply one-screw is essential to secure the BL motor, towards nicely created durable machined aluminium motormount. Spot for additional motor-cooling available as needed. The region the motor permits mounting all popular buggy and (monster)truggy motors.

    Composite framework braces
    Allows the framework to flex which assists enhance bump control. Front and rear.

    Front bumper
    Nicely curved front part bumper, similar to towards Cobra buggy, to shield the best anti-roll club, suspension system system system system system brackets, and moves inline with kick-up framework front side for safe landings.

    front component suspension
    Very long and durable composite reduced wishbones, together with top spring-steel trackrods. 2 compensated shock-mount functions. Downstops can be utilized as required. Pivotball kind anti-roll club rods.
    .
    Front steering / servo saver / angled
    Innovative angled front component steering setup to attenuate the angle of distinction between volume total caster and steering airplane. Consequently you must have less bump steer and a truer steering Ackerman through the whole assortment of suspension.

    Adjustable springtime stuffed servo-saver system with interchangeable Ackermann dishes. Using the design through the steering bell cranks whenever changing the Ackerman may very well not must adjust your steering tie rods. You simply will however just need to adjust your end points within radio.. simple enough to find yourself in and set-up.

    The Inboard Bell crank keeps the lever and linkage in automobile. It helps in preventing problems for the steering system. Zero scrub radiuses on steering knuckle, assists in reducing the jacking impact generated by your steering knuckle offset. It gives a much more direct dropped while keeping the cars chassis more level while turning.

    The front roll center are changed quickly by going the steering knuckle shims utilizing their appropriate locations.

    Topped of with a significant composite top-plate.

    Front steering-block / c-hubs
    Very durable front component steeringblock / C-hub installation .

    Drive-shafts
    very long and lightweight springtime metal services and products with forced in steel pins, laser-engraved. Same size front component and rear.

    Wheel-axles / wheel-nut
    Serpent springtime metal threaded wheel-axles with lightweight grey anodised aluminium wheel-nuts to help keep the massive truggy wheels/tyres on program.

    Captured universal joints
    Guarantees you need to complete a race without loosing a pin or set screw. All elements, axles and drive train elements have actually really capture pins

    Front shocktower
    Light, strong and durable machined 5mm aluminium services and products with 5 jobs for shockangle.

    Shock-set front component and rear
    16mm big bore shocks, with difficult anodized precision threaded shock-bodies. Shockboots in silicone synthetic to help keep the dust away . Chromed shock-shafts for supersmooth shockaction . Better o bands offer less basic force and an improved seal without dragging to the surprise shaft.

    Suspension brackets
    The hinge-pins / hingepin balls are captured in durable composite suspension system system system brackets . These capture the nylon roll-center inserts.

    Anti-roll club / anti-roll club linkage with pivotball
    The anti-roll pubs front and right back are made of top-quality unique springtime metal, since they are additionally captured regarding diff-cased in ballbearing for perfect guidance and control.

    Receiver package / servo mount / speedo mount
    Composite one piece radiobox to firmly install servo� s, speedo and receiver. For optimum security the light receiver fits the top-case effortless, with a little opening allowing cable to protrude. The speedo seats low on a plate just above the framework, for this reason fast cables permit you to the motor. The servo is set up in a vertical fashion.

    Central diff
    Optimised main gear-diff with 50T super-hard spur-gear . Small, compact design to lessen rotating mass on max.

    Transmission shafts
    Durable but light and slim Serpent springtime steel, laser etched shafts.

    front side and straight back diff
    Optimised gear-diff with superhard spur-gears . Smaller, compact design to minimize rotating mass on optimum. Identical version front component and straight back. Diff coupler in springtime steel seated in big barings for durability.

    Rear shocktower
    Light, strong and durable machined 5mm aluminum product with 5 functions for shockangle.

    Rear uprights
    Durable composite straight back uprights with 3 camber positions

    Suspension brackets rear
    Durable composite products with eccentric inserts to improve set-up.

    Rear wing mount
    The composite right back wing mount, allows to boost the angle related to back wing.

    Rear wing
    Two period high down force wing, has two examples of angle, that also includes 2 fins. Helps improve down force and right line capability

    Bodymounts
    Nylon bodymounts with wider sitting the body, firmly fastened on shocktowers.

    Super Minimal profile e-Truck Body
    Improves look including keeps the profile minimum. Comes precut and prepainted.

    Decals
    Applied towards human body.

    Oils / grease
    Car is made with a high quality silicone oils the diffs and shocks and black colored colored colored oil. Threadlock employed in which required.

    Manual
    Full color manual showing the car, demands, tips and exploded views. The transmitter and speedo have actually really in reality in reality actually small split manuals included.

    Box
    Full color protective package to re-use for automobile transportation or tyres.





Copyright © 2008-2024 rcjaz.ca All rights reserved


Flash Special Offer for Boss Birthday
Celebrate our boss birthday today! Redeem the voucher code [BOSSBD24] for 5% OFF with no minimum order required.