Serpent SER600039-R Serpent Cobra E-Truggy RTR red [SER600039-R]

Price:

CAD$524.25

Brand:

Serpent

Model:

SER600039-R

Not Available

Please kindly input your name and email address, we will inform you once we have the restocking.

Or you may find similar product under the
R/C Models - Off-Road - Truggy - Electric Powered category

Write a review

Description

Introduction

The Serpent Cobra E-Truggy in RTR trim is an excellent basher type car that may you will need to just take many beating and its own also outstanding package in the first place genuine battle ! Based on the Cobra E-Truggy oahu could be the outright price, great management, reliability, rigidness and durability you need.

The RTR package is actually dialed:
-factory produce rushing chassis
-prepainted and precut low kind truggy human anatomy and big composite backside wing
-premounted truggy tyres/wheels/inserts
-pre-set 4S to 6S capable waterproof 150A speedo ( DragonRC)
-2000kv brushless longbody motor (DragonRC)
-Digital 2.4ghz transmitter (DragonRC)
-Metal gear servo 16kg ( DragonRC-Savox)
-3 oilfilled geardifferentials
-Big bore shocks with artificial dustboots and machined aluminium shocktowers
-Spring steel transmission elements and turnbuckles, front part and straight back cvd driveshafts
-Front and straight back anti-roll bars
-Large battery-cases with effortless felcron straps
-Machined aluminium chassisplate
-Fully ballraced
-Batteries the vehicle and transmitter aren't included

The bodyshell is needed orange, red, green, blue and red, additionally an evident type.

Serpent provides numerous optional elements with this particular car to enhance performance, lighter and even for in addition nicer appearance.

Main features

Car
Fully expert pre develop and pre-set framework and electronic devices.

Transmitter
DragonRc 2.4 GHz steeringwheel sort transmitter with lots settings and good range. Includes small and light receiver.

Speedo
DragonRC waterproof speedcontroller with a huge 150A capacity to have a handle regarding brushless motor and 4S or 6S battery pack power

Motor
DragonRC longbody 2000kV brushless engine with effortless colorcoded connectors

Body
Prepainted and pre-cut low e-Truggy body, in 4 primary colors orange, red, Green and Blue. ( moreover clear one available as optional)

Tyres
Premounted battle ready tyres / tires with soft substances and pintype profile for amazing grip.

Chassis
Very slim 3mm 7075T6 aluminium framework, with machining regarding top face rendering it lighter in strategic areas and also to get a handle on flex. Kick-up front side for appropriate landings. Angled element of improve cornering approval, and safe and easy mounting component guards with 5 screws. Countersunk holes, pouches to put the suspension system system brackets. Usually the Truggy is made to keep consitently the fat in reality main and towards the centerline that you can, to generate a great general security.

Side guards / battery power trays
Durable shaped composite component guards / electric batteries trays that continue all of the present distinct the framework, and mount with 5 screws each component. Front and sides adequate to hold the dust away. The guards/trays create many safety. The batteries are setup in longtudinal fashion, maintaining the additional weight low inside automobile. The battery power trays features user friendly Serpent noticeable felcron TM straps to secure the batteries in place. Fits 2S and 3S batteries.

Motormount:
The motor is based on the many optimal spot inside vehicle, keeping motor-forces and transmission elements / placement in mind. Merely one-screw must secure the BL motor, inside ripped durable machined aluminium motormount. Area for additional motor-cooling available as required. The positioning the engine enables mounting all popular buggy and (monster)truggy motors.

Composite framework braces
Allows the framework to flex which assists enhance bump managing. Front and rear.

Front bumper
Nicely curved front bumper, the same as in regards to the Cobra buggy, to shield the main thing anti-roll club, suspension system system system system brackets, and moves inline with kick-up framework front side for safe landings.

front part suspension
Very long and durable composite reduced wishbones, in conjunction with top spring-steel trackrods. 2 paid down shock-mount jobs. Downstops works well as required. Pivotball type anti-roll club rods.
.
Front steering / servo saver / angled
Innovative angled front component steering make to reduce the angle of difference involving the whole total caster and steering airplane. Therefore you'll have less bump steer and a truer steering Ackerman through the whole choice of suspension.

Adjustable springtime stuffed servo-saver system with interchangeable Ackermann dishes. Because of design with this specific steering bell cranks whenever changing the Ackerman might easily perhaps not should adjust your steering tie rods. You only simply must adjust your end points by yourself radio.. easier than you think getting using and set-up.

The Inboard Bell crank keeps the lever and linkage on automobile. It'll guidance about preventing problems for the steering system. Zero scrub radiuses on steering knuckle, assists in reducing the jacking impact manufactured by the steering knuckle offset. It gives a direct fallen while keeping the automobiles framework more degree while turning.

The front roll center is changed quickly by going the steering knuckle shims regarding their appropriate locations.

Topped of with a decent composite top-plate.

Front steering-block / c-hubs
Very durable front component steeringblock / C-hub construction .

Drive-shafts
very long and lightweight springtime metal products with pressed in steel pins, laser-engraved. Identical size front component and rear.

Wheel-axles / wheel-nut
Serpent springtime steel threaded wheel-axles with lightweight grey anodised aluminium wheel-nuts to put up the huge truggy wheels/tyres on program.

Captured universal joints
Guarantees you can expect to finish a race without loosing a pin or set screw. All elements, axles and drive train elements have really capture pins

Front shocktower
Light, strong and durable machined 5mm aluminium services and products with 5 functions for shockangle.

Shock-set front component and rear
16mm big bore shocks, with difficult anodized precision threaded shock-bodies. Shockboots in silicone synthetic to carry the dirt away . Chromed shock-shafts for supersmooth shockaction . The greater amount of expensive o bands provide less basic anxiety and an improved seal without dragging regarding surprise shaft.

Suspension brackets
The hinge-pins / hingepin balls are captured in durable composite suspension system system brackets . These capture the nylon roll-center inserts.

Anti-roll club / anti-roll club linkage with pivotball
The anti-roll pubs front and back are constructed of quality unique springtime metal, and so are additionally captured on diff-cased in ballbearing for perfect guidance and control.

Receiver industry / servo mount / speedo mount
Composite one piece radiobox to securely install servoï¿½ s, speedo and receiver. For maximum security the light receiver fits the top-case effortless, with a tiny opening to permit cable to protrude. The speedo seats suprisingly low on a plate just above the framework, for this reason fast cables enables you to the engine. The servo is established in a vertical fashion.

Central diff
Optimised main gear-diff with 50T super-hard spur-gear . Tiny, compact design to cut back rotating mass on max.

Transmission shafts
Durable but light and slim Serpent springtime steel, laser etched shafts.

front part and back diff
Optimised gear-diff with superhard spur-gears . Small, compact design to cut back rotating mass towards many. Identical variation front side component and rear. Diff coupler in springtime steel seated in big barings for durability.

Rear shocktower
Light, strong and durable machined 5mm aluminum product with 5 positions for shockangle.

Rear uprights
Durable composite back uprights with 3 camber positions

Suspension brackets rear
Durable composite services with eccentric inserts to boost set-up.

Rear wing mount
The composite back wing mount, licenses to improve the angle towards back wing.

Rear wing
Two duration high down force wing, has two levels of angle, which also includes 2 fins. Helps improve down force and right line capability

Bodymounts
Nylon bodymounts with wider seating the body, securely fastened on shocktowers.

Super Minimal profile e-Truck Body
Improves look and keeps the profile minimum. Comes precut and prepainted.

Decals
Applied towards body.

Oils / grease
Car is put together with a top quality silicone sebum the diffs and shocks and black colored colored oil. Threadlock present which needed.

Manual
Full color manual showing the car, requirements, tips and exploded views. The transmitter and speedo have actually actually in reality small split manuals included.

Box
Full color protective industry to re-use for vehicle transport or tyres.

Hot Brands

Serpent SER600039-R Serpent Cobra E-Truggy RTR red [SER600039-R]