Tamiya 58268 - 1/20 RC Mammoth Dump Truck
This is the Tamiya 1/20th Scale electric, radio control Mammoth Dump Truck.
This durable kit is done regarding earthshaking mammoth dump automobiles present major mining alongside quality jobs.
FEATURES:
Effective shaft driven 4WD.
Two engines; one 540 size to push the tires; one smaller engine with worm gear shaft for dump human anatomy operation.
Kit uses two channel radio for several functions, to enhance bed end car and steer perfect for several second, return steering
to fundamental to eliminate increasing, steer kept for bringing down. No requirement for expensive three channel radios.
Fully practical dump human anatomy supports to 8.8 pounds (4kg) of item for dumping.
Durable die-cast gears housed appropriate ahead and back sealed gearboxes.
Four wheel suspension system system system packed with coil and leaf spring shock devices.
Durable Juggernaut 2 Monster Truck chassis.
Cab and dump human anatomy are molded in surprise resistant plastic.
6-1/8" (156mm) diameter 2-3/8" (60mm) wide plastic tread tires pre- put up on artificial metal finish tires.
INCLUDES:
One 1/20th Scale electric broadcast Control Mammoth Dump Truck with electronic price control with Futaba J receiver plugs and Standard battery power connectors, 6-1/8" (156mm) x 2-3/8" (60mm) plastic tread tires pre-mounted on synthetic steel finish tires, one pipe thread securing element, one 4-way wrench, two pipelines of grease, artificial ties, flat blade screwdriver, human anatomy pins, double sided tape, two hex wrenches.
NEEDS:
Broadcast: 2 channel pistol hold with two servos.
Battery: 7.2v flat stick pack.
Tools: big and tiny blade phillips screwdrivers, tweezers, modeling blade, extended nose pliers, component cutters, scissors, pin vise
and artificial concrete.
SPECS: Length: 20-5/8" (525mm)
Width: 11-5/8" (295mm)
Height: 11-13/16" (300mm)
fat: 12.2 pounds (5.5kg)
FEEDBACK:
For replacement bearings use:
1- 5x8 Gear Assembly
3- 5x11 Gear Assembly
1- 5x8 countertop Gearbox
1- 5X11 countertop Gearbox
1- 6x12 Driveshafts
2- 6x12 front side Uprights
2- 6x12 rear Uprights
2- 3x7 Rack Gearbox
1- 5x8 Rack Gearbox
1- Tamiya MV1 4mm flanged metal bearing Rack Gearbox
2- Tamiya MV1 4mm flanged metal bearing L & R Rack Case Assem.
1- 5x8 L & R Rack Case Assembly
