Yokomo Y2-415CPA Front & rear brake disk/caliper set for YD-2 series  [Y2-415CPA]

　This is a dummy brake disc and caliper set that can be used commonly for all YD-2 series vehicles. The brake disc is integrated with the hexagonal hub for mounting the wheel, and of course rotates with the wheel. Three types of hub thickness are included: 5.5mm, 6.5mm, and 8.0mm, so you can freely adjust the tread width and scrub radius. On the other hand, the gunmetal color brake calipers are fixed on the front and rear knuckles, giving it a realistic look just like the actual car while driving. The brake discs and calipers peeking through the gaps between the wheels give the machine a great boost.
The set also includes a resin steering block and rear hub carrier, which make it easier to install the caliper, and are shaped to match the latest settings. The optimal trail and kingpin angle for the steering block are set based on the structure of the actual vehicle, enhancing the look during countersteering while also improving steering response. The steering stopper and tie rod mounting position have also been modified to the latest specifications, resulting in smooth operation when increasing the steering angle. The rear hub carrier has an additional upper arm mounting position, and the range of settings for roll center and ground camber changes has been increased, allowing settings that actively utilize roll. Especially on roads with low grip such as P-tiles, the upper arm is mounted higher to maintain the ground contact area when the chassis rolls, ensuring stable lateral grip and achieving aggressive driving. .