Yokomo Y2-415ART Teams Aluminum 3-piece rear hub carrier set for YD-2  [Y2-415ART]

This is an aluminum rear hub carrier that can be used in common with the YD-2 series. By using a universal shaft with a short axle axis for narrow scrubs and setting the universal joint pin as far outside as possible, moving it closer to the outer suspension arm pin activates the suspension movement and enables more direct movement. It will be. Conventional universal shafts can also be used by adding spacers, so you can feel the difference in movement depending on the combination.
This rear hub carrier set is characterized by the ability to select the mounting position of the upper/lower arm, and by making the upper side a separate part, the length of the upper arm can be changed variably, and the contact surface when rolling. It is easy to control changes and is an effective setting point especially on roads such as P tiles. The mounting height of the lower arm can be selected from 4 positions, which greatly expands the range of roll center settings, making it perfect for adjusting the weight around the rear.

* If you use the lowest suspension arm mounting hole, the suspension arm and the inside of the wheel may interfere depending on the type of wheel.
All mounting positions are available for Racing Performer RP-6313 series wheels.

Supported Chassis
SDR-020 / SDR-020P / SDR-020R